
E1 GNSS RTK Receiver
Base & rover RTK receiver with IMU tilt
- Channels
- 1408
- Protection
- IP68
- Tilt
- 60° IMU

Model L1 AR · RTK receiver with camera and AR stakeout
L1 AR puts a low-light camera in the receiver and overlays your design points on the live view, so you walk to the stake on screen instead of chasing north/east offsets. Combined with 60° IMU tilt it removes most of the time spent levelling the pole.
Import CAD drawings (DWG, DXF) to the controller and stake out lines and points directly from the drawing. The camera keeps working in poor light thanks to a starlight-grade sensor.
Under the hood it is the same full-constellation RTK engine as our other receivers, with < 5 s initialisation and an internal 5–15 km radio.
All GNSS RTK Receivers
Construction & infrastructure solutions
| GNSS engine | 1408 channels, full constellation |
|---|---|
| Signals | See signal table below |
| Camera | Starlight-grade, for AR visual stakeout |
| Tilt survey | IMU, up to 60° |
| RTK initialisation | < 5 s, > 99.9 % reliability |
| Internal radio range | 5–15 km |
| Connectivity | UHF, Wi-Fi, Bluetooth, NFC |
| Ingress protection | IP68 (IP67 on some batches) |
| Operating temperature | −30 °C to +65 °C |
| Warranty | 1 year |
| Shipping box | 16 × 34 × 31 cm, 4.5 kg |
| GPS | L1C/A, L1C, L2C, L2P(Y), L5 |
|---|---|
| GLONASS | L1, L2, L3 |
| Galileo | E1, E5a, E5b, E6 |
| BeiDou | B1I, B2I, B3I, B1C, B2a, B2b |
| QZSS | L1, L2, L5, L6 |
| NavIC (IRNSS) | L1, L2, L5 (as listed by the manufacturer) |
| SBAS | L1, L2, L5 |
Signal list for the 1408-channel GNSS engine. Exact support can vary by firmware version; ask for the datasheet of your batch.
We send PDF datasheets, manuals and software details for each batch, together with your quotation.
Request datasheet and priceSpecifications are typical values and may change with product updates. Accuracy depends on satellite geometry, multipath, baseline length and correct set-up.
Typical configuration. Kits are adjusted to your order; tell us what you already own.
Not answered here? Ask our engineers.
The receiver camera shows the ground in front of you and the software draws the design point on that image, so you can see exactly where to place the stake rather than reading distance and bearing.
No – the final position is still measured by RTK. The camera simply guides you to the point faster.
MOQ is one unit. We accept T/T and quote EXW, FOB Shanghai, CIF or DAP. Stock units usually ship in 3–7 working days by express, air or sea freight, with a one-year warranty.

Base & rover RTK receiver with IMU tilt

Compact, lightweight RTK receiver

RTK receiver with 1.1" colour status screen

RTK receiver with laser for non-contact points
Price, kit contents and delivery to your country, usually within one business day.